Air-conditioning compressor manufacturers: What are the maintenance methods for compressors

　　In the process of actual use of air-conditioning compressors, most people may want to know the maintenance methods of these compressors. If the manufacturer of the air-conditioning compressor wants to use the product, it must understand the situation of the product. Then, what kind of maintenance method does this product have in the process of maintenance?

　　Method 1: Check on the car

　　When starting the air-conditioning compressor, it’s best to keep it at about 1500 revolutions per minute. All the pressure gauges should be connected to the refrigeration system, and the air-conditioning system should be turned on. In this way, the compressor can be touched at the largest position of the entire fan. The place of export and import. Under normal circumstances, the inlet area is relatively cool, and the exhaust port is relatively hot. The temperature difference between the two is still relatively large. If the temperature difference is relatively small, look at the pressure gauge again.

　　Method 2: disassembly of the air-conditioning compressor

　　When the air conditioner compressor manufacturer actually inspects the equipment, the disassembly of the compressor is very important. Generally speaking, when disassembling the air conditioner compressor, you can look at the high and low pressure pipes, and seal them at the nozzles. It can prevent other objects from entering the place of the nozzle. Immediately afterwards, unplug the electromagnetic clutch plug and remove the belt of the compressor.

　　What kind of maintenance plan does the air conditioner compressor manufacturer have in the process of actual maintenance of the product? You can learn about the above inspection methods.